編    號:     H02610003-EN 日    期:   2017-06-14
問    題:   How to use the new version of AR-881EF for Lift Control?
答    案:  

Notes:

If plug 725L485 to CN13 of 881EF, the client need to open 881EF and then the cable need to cross the hole of board.

1-2.  Setting via Software: Just double check the setting of RS485-3port is Lift Controller (keep default)

(1)   Click “82XV5” button on Menu Bar

(2)   Select Target Node ID (Eg: Node ID 001)

(3)   Click”Read” to read parameter setting from controller

(4)   RS485-3Port Select Lift Controller (default); RS485-1 Port Select Host. Comm Port (default)

(5)   Click “ Write” to write new parameter setting to controller

 

Method2: Change Built-in Host Port for PC communicationtoLift Control

2-1:Wiring

2-2:Enable Lift Control Setting

2-2-1Way1 via Software : Change RS485-1 Option from Default Host Comm. Port to Lift Controller

(1)   Click “82XV5” button on Menu Bar

(2)   Select Target Node ID (Eg: Node ID 001

(3)   Click”Read” to read parameter setting from controller

(4)   RS485-1 Port change from Host. Comm Port (default) toLift Controller;

(5)   Click “ Write” to write new parameter setting to controller

 

2-2-1Way via Hardware:

37*00# for Lift Control

 

Total 2 way to edit the floor card for User

1. Way1:Setting via 701Client Software

  (1) Click [8-User] setting icon on Menu Bar

  (2) Select [Tools]------>[User Access Floor Edit]

(3) Select[User Address]

(4) Tick [Floor Number] the use allow to access

(5) Select [829E/727H/725H]

(6) Select [Node ID]

(7) Select as Mode Type

(8) Click [Write Current] to write the user floor data to controller

※If need to download all user floor cards setting at one time , please click [Save] to save current data ,after completing all setting, click [Write All] to download all.

※If want to check the user current data, please ,click [Read Current] to read data from controller 

※ If want to check all user data, please ,click [Read All] to read all data from controller 

2. Way2:Setting via Hardware